Position:Home > News > Industry News
Common damage factors and laying skills of high-temperature silica gel connecting wire
Time:2024-01-30 Read: 1107

1、 Common damage factors of high-temperature silica gel connecting wire:


High-temperature silica gel connecting wireImproper use and incorrect wiring methods cause the high-temperature silica gel connecting wire to be short-circuited and burnt. In order to avoid this situation, we need to pay attention to the connection method when connecting the high-temperature silica gel connecting wire, which can help us solve the problem of short circuit caused by improper connection.


There are corrosive substances in the environment, which is easy to cause the skin of high-temperature silica gel connecting wire to be exposed to corrosive substances, and it is easy to be corroded for a long time, causing damage to high-temperature silica gel connecting wire.


Own quality problems. The quality of high-temperature silica gel connecting wire produced by different manufacturers is different. The inferior high-temperature silica gel connecting wire is not only poor in external insulation material, but also poor in internal metal core. Therefore, due to the material problem, the high-temperature silica gel connecting wire is easy to be damaged due to poor quality in long-term use. Therefore, when selecting high-temperature silica gel connector, pay attention to the selection of high-quality high-temperature silica gel connector.

高温硅胶连接线.jpg

2、 Laying skills of high-temperature silica gel connecting wire:


The laying device of high-temperature silica gel connecting wire should be carried out by experienced personnel. Buildings and equipment that do not meet relevant standards may affect the normal operation of high-temperature silica gel connecting wire.


When laying the high-temperature silica gel connecting wire manually, the operation rhythm should be unified, and the high-temperature silica gel connecting wire should be pulled every 1.5 to 3 meters, and gradually applied while pulling.


For mechanical laying of high-temperature silica gel connecting wire, generally choose the use of silica gel wire laying machine, equipped with the required traction, large traction, suitable and uniform, to ensure that the high-temperature silica gel connecting wire will not be damaged.


Before laying the high-temperature silica gel connecting wire, check its appearance and whether the head is complete. Pay attention to the rotation direction of the silicone cable reel under pressure, and do not flatten or damage its outer sheath. When the temperature is low in winter, the high-temperature silica gel connecting wire cannot fall off for correction to prevent the insulation and sheath from breaking.

Contact us

Shenzhen WENJIAN Electronics Co., Ltd

Address: 4th floor, No. 6, Shangliao Puyuwei Road, Shajing Street, Bao'an District, Shenzhen, Guangdong Province
Tel: 0755-82598337
Fax: 0755-27281825
e-mail:luowenhong@wenjiancn.com
Q Q:479626638
Luo Sheng 15007550148

Follow us

Manufacturer of on-board harness, new energy charging pile harness, terminal harness, vehicle OBD2 diagnostic cable, LVDS harness


Copyright: Shenzhen Robust Electronics Co., Ltd