Position:Home > News > Common problem
What are the factors that affect the aging of electric vehicle harness?
Time:2021-03-12 Read: 1705

Electronic harness aging isElectric wire harnessFrequently asked questions. Know the cause of harness aging to prevent harness aging. The direct cause of harness aging is the reduction of insulation. What are the factors that affect the aging of electric vehicle harness?

电动车线束

1. Connector failure. The harness connector is the weak link in the circuit. The harness connector failure caused by the negligence of personnel often occurs. During the processing of harness connector, if the connector is not pressed tightly and the heating is not sufficient, the insulation of the harness head will be reduced, causing accidents.


2. External force damage. Now many electronic harness failures are caused by external force damage. For example, the installation of wire harness is not standardized, which is easy to cause damage. Sometimes, if the damage is not serious, it may take a long time to cause the complete breakdown of the damaged part and form a fault. If the damage is serious, a short circuit fault may occur, which directly affects the safety.


3. Environment and temperature, the heat source of the external environment where the electronic harness is located will also cause the cable temperature to be too high and insulation breakdown.

电动车线束

4. Chemical corrosion: when the electronic harness works in the area with acid and alkali effects, it often causes the corrosion of the protective layer outside the harness. Long-term chemical corrosion or electrolytic corrosion will damage the protective layer, and the failure of the protective layer and the reduction of the insulation performance will also lead to the failure of the harness.


5. During long-term overload operation, due to the thermal effect of current, when the load current passes through the harness, the wire will heat up, thus increasing the temperature of the electronic harness. During long-term overload operation, too high temperature will accelerate insulation aging and lead to insulation breakdown. Especially in hot summer, there are many harness faults.

Contact us

Shenzhen WENJIAN Electronics Co., Ltd

Address: 4th floor, No. 6, Shangliao Puyuwei Road, Shajing Street, Bao'an District, Shenzhen, Guangdong Province
Tel: 0755-82598337
Fax: 0755-27281825
e-mail:luowenhong@wenjiancn.com
Q Q:479626638
Luo Sheng 15007550148

Follow us

Manufacturer of on-board harness, new energy charging pile harness, terminal harness, vehicle OBD2 diagnostic cable, LVDS harness


Copyright: Shenzhen Robust Electronics Co., Ltd