Position:Home > News > Industry News
Methods that can be tested in case of automobile harness failure
Time:2023-09-13 Read: 687

Automotive wiring harnessIt is the main network of automobile circuits. Without automobile wiring harness, there would be no automobile circuits. The harness is a component that connects the power circuit by binding the external plastic insulator or additional metal material housing after pressing the contact terminal (connector) made of copper material onto the wire and cable.

汽车线束


Methods that can be tested when the car harness fails:


1、 Test method of special tools for automobile wire harness

The test lamp detection method is more suitable for checking the general fault state of the open circuit of the transmission line. When using the temporary test lamp method, the output power of the test lamp does not need to be too large. When testing whether the operation output terminal of the instrument panel of electronic equipment has output or sufficient output, special attention should be paid to avoid overloading and damaging the instrument panel. It is best to use the diode test lamp.


2、 Visual test method for automobile wiring harness

When a common fault occurs in a part of the automobile electrical system, abnormal conditions such as smoke, flame, sound, burning smell, temperature, etc. will occur. Through visual inspection of human sensory organs such as listening, touching, smell, car harness, household appliances, etc., the location of common faults can be identified, which greatly speeds up the maintenance. For example, when there are common faults in the car route, abnormal conditions such as smoke, flame, sound, burning smell of plastic, high temperature, etc. often occur. According to the visual inspection, the fault location and general fault characteristics can be quickly distinguished.


3、 Test methods for automobile wiring harness and instrument equipment

The fault of automobile circuit can be diagnosed by using comprehensive fault detector, digital multimeter, oscilloscope, current clamp and other instruments and equipment. For vehicles equipped with electronic control systems, comprehensive fault diagnosis tools are generally used to search for fault codes and determine the fault range of the vehicle. Then use a digital multimeter, current clamp or lute to check the working voltage, resistance, current or waveform of the relevant power circuit, and determine the fault location of the vehicle harness transmission line.

Contact us

Shenzhen WENJIAN Electronics Co., Ltd

Address: 4th floor, No. 6, Shangliao Puyuwei Road, Shajing Street, Bao'an District, Shenzhen, Guangdong Province
Tel: 0755-82598337
Fax: 0755-27281825
e-mail:luowenhong@wenjiancn.com
Q Q:479626638
Luo Sheng 15007550148

Follow us

Manufacturer of on-board harness, new energy charging pile harness, terminal harness, vehicle OBD2 diagnostic cable, LVDS harness


Copyright: Shenzhen Robust Electronics Co., Ltd