Position:Home > News > Industry News
Structure and process of terminal wire
Time:2019-06-05 Read: 2000

Leadwire

The terminal wire, also known as Flexible FlatCable (FFC), can select the number and spacing of wires at will, which makes wiring more convenient, greatly reduces the volume of electronic products, reduces production costs, and improves production efficiency. It is most suitable for data transmission cables between mobile parts and mainboards, between PCBs and PCBs, and in small electrical equipment. Common specifications include 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.27mm, 1.5mm, 2.0mm, 2.54mm flexible cable cables with various spacing.

Structure of terminal wire

The terminal line is composed of busbar, rubber shell, FFC cable, welding terminal, rubber shell with pin, etc., as shown in the figure.

Finished product characteristics of terminal wire

Common models of terminal wire

Type A: both ends are connected and the reinforcing plate is pasted on the insulating tape;

Type B: the reinforcing plate is directly pasted on the insulating adhesive tape;

Type C: the reinforcing plates at both ends are directly pasted on the conductor;

Type D: the reinforcing plates at both ends are directly pasted on the conductor;

Type E: one end of the reinforcing plate is pasted on the insulating tape, and the other end is directly soldered;

Type F: the reinforcing plates at both ends are directly pasted on the insulating tape, and the inner half is peeled off;

Type G: direct soldering at both ends.

Crimping of terminal wire

Crimping principle of terminal wire

Through mechanical extrusion, the wire core is tightly contained by the rigidity of the metal material of the terminal wire

Process of crimping

1 Prepare terminal wires and wires according to the requirements of process documents

2 Pull off the wire cover and tidy the wire and tie it with rubber band

3 Grasp the wire and place it on the left side of the crimping lug

4 Gently press the wire against the crimp positioning block and align the wire with the crimp pin

5 Tread lightly

6 Slide the crimped wire out of the right side of the crimping lug

7 Inspection

Contact us

Shenzhen WENJIAN Electronics Co., Ltd

Address: 4th floor, No. 6, Shangliao Puyuwei Road, Shajing Street, Bao'an District, Shenzhen, Guangdong Province
Tel: 0755-82598337
Fax: 0755-27281825
e-mail:luowenhong@wenjiancn.com
Q Q:479626638
Luo Sheng 15007550148

Follow us

Manufacturer of on-board harness, new energy charging pile harness, terminal harness, vehicle OBD2 diagnostic cable, LVDS harness


Copyright: Shenzhen Robust Electronics Co., Ltd